Skip to main content

Basic Security

The Basic Security extension for Apache Druid adds:

  • an Authenticator which supports HTTP Basic authentication using the Druid metadata store or LDAP as its credentials store.
  • an Escalator which determines the authentication scheme for internal Druid processes.
  • an Authorizer which implements basic role-based access control for Druid metadata store or LDAP users and groups.

To load the extension, include druid-basic-security in the druid.extensions.loadList in your common.runtime.properties. For example:

druid.extensions.loadList=["postgresql-metadata-storage", "druid-hdfs-storage", "druid-basic-security"]

To enable basic auth, configure the basic Authenticator, Escalator, and Authorizer in common.runtime.properties. See Security overview for an example configuration for HTTP basic authentication.

Visit Authentication and Authorization for more information on the implemented extension interfaces and for an example configuration.

Configuration​

The examples in the section use the following names for the Authenticators and Authorizers:

  • MyBasicMetadataAuthenticator
  • MyBasicLDAPAuthenticator
  • MyBasicMetadataAuthorizer
  • MyBasicLDAPAuthorizer

These properties are not tied to specific Authenticator or Authorizer instances.

To set the value for the configuration properties, add them to the common runtime properties file.

General properties​

druid.auth.basic.common.pollingPeriod

Defines in milliseconds how often processes should poll the Coordinator for the current Druid metadata store authenticator/authorizer state.
         Required: No
         Default: 60000

druid.auth.basic.common.maxRandomDelay

Defines in milliseconds the amount of random delay to add to the pollingPeriod, to spread polling requests across time.
         Required: No
         Default: 6000

druid.auth.basic.common.maxSyncRetries

Determines how many times a service will retry if the authentication/authorization Druid metadata store state sync with the Coordinator fails.
         Required: No
         Default: 10

druid.auth.basic.common.cacheDirectory

If defined, snapshots of the basic Authenticator and Authorizer Druid metadata store caches will be stored on disk in this directory. If this property is defined, when a service is starting, it will attempt to initialize its caches from these on-disk snapshots, if the service is unable to initialize its state by communicating with the Coordinator.
         Required: No
         Default: null

Authenticator​

To use the Basic authenticator, add an authenticator with type basic to the authenticatorChain. The default credentials validator (credentialsValidator) is metadata. To use the LDAP validator, define a credentials validator with a type of 'ldap'.

Use the following syntax to configure a named authenticator:

druid.auth.authenticator.<authenticatorName>.<authenticatorProperty>

Example configuration of an authenticator that uses the Druid metadata store to look up and validate credentials:

# Druid basic security
druid.auth.authenticatorChain=["MyBasicMetadataAuthenticator"]
druid.auth.authenticator.MyBasicMetadataAuthenticator.type=basic

# Default password for 'admin' user, should be changed for production.
druid.auth.authenticator.MyBasicMetadataAuthenticator.initialAdminPassword=password1

# Default password for internal 'druid_system' user, should be changed for production.
druid.auth.authenticator.MyBasicMetadataAuthenticator.initialInternalClientPassword=password2

# Uses the metadata store for storing users, you can use authentication API to create new users and grant permissions
druid.auth.authenticator.MyBasicMetadataAuthenticator.credentialsValidator.type=metadata

# If true and the request credential doesn't exists in this credentials store, the request will proceed to next Authenticator in the chain.
druid.auth.authenticator.MyBasicMetadataAuthenticator.skipOnFailure=false
druid.auth.authenticator.MyBasicMetadataAuthenticator.authorizerName=MyBasicMetadataAuthorizer

The remaining examples of authenticator configuration use either MyBasicMetadataAuthenticator or MyBasicLDAPAuthenticator as the authenticator name.

Properties for Druid metadata store user authentication​

druid.auth.authenticator.MyBasicMetadataAuthenticator.initialAdminPassword

Initial Password Provider for the automatically created default admin user. If no password is specified, the default admin user will not be created. If the default admin user already exists, setting this property will not affect its password.
         Required: No
         Default: null

druid.auth.authenticator.MyBasicMetadataAuthenticator.initialInternalClientPassword

Initial Password Provider for the default internal system user, used for internal process communication. If no password is specified, the default internal system user will not be created. If the default internal system user already exists, setting this property will not affect its password.
         Required: No
         Default: null

druid.auth.authenticator.MyBasicMetadataAuthenticator.enableCacheNotifications

If true, the Coordinator will notify Druid processes whenever a configuration change to this Authenticator occurs, allowing them to immediately update their state without waiting for polling.
         Required: No
         Default: True

druid.auth.authenticator.MyBasicMetadataAuthenticator.cacheNotificationTimeout

The timeout in milliseconds for the cache notifications.
         Required: No
         Default: 5000

druid.auth.authenticator.MyBasicMetadataAuthenticator.credentialIterations

Number of iterations to use for password hashing. See Credential iterations and API performance
         Required: No
         Default: 10000

druid.auth.authenticator.MyBasicMetadataAuthenticator.credentialsValidator.type

The type of credentials store (metadata) to validate requests credentials.
         Required: No
         Default: metadata

druid.auth.authenticator.MyBasicMetadataAuthenticator.skipOnFailure

If true and the request credential doesn't exists or isn't fully configured in the credentials store, the request will proceed to next Authenticator in the chain.
         Required: No
         Default: false

druid.auth.authenticator.MyBasicMetadataAuthenticator.authorizerName

Authorizer that requests should be directed to.
         Required: Yes
         Default: N/A

Credential iterations and API performance​

As noted above, the value of credentialIterations determines the number of iterations used to hash a password. A higher number of iterations increases security. The default value of 10,000 is intentionally high to prevent attackers from using brute force to guess passwords. We recommend that you don't lower this value. Druid caches the hash of up to 1000 passwords used in the last hour to ensure that having a large number of iterations does not meaningfully impact query performance.

If Druid uses the default credentials validator (i.e., credentialsValidator.type=metadata), changing the credentialIterations value affects the number of hashing iterations only for users created after the change or for users who subsequently update their passwords via the /druid-ext/basic-security/authentication/db/basic/users/{userName}/credentials endpoint. If Druid uses the ldap validator, the change applies to any user at next log in (as well as to new users or users who update their passwords).

Properties for LDAP user authentication​

druid.auth.authenticator.MyBasicLDAPAuthenticator.initialAdminPassword

Initial Password Provider for the automatically created default admin user. If no password is specified, the default admin user will not be created. If the default admin user already exists, setting this property will not affect its password.
         Required: No
         Default: null

druid.auth.authenticator.MyBasicLDAPAuthenticator.initialInternalClientPassword

Initial Password Provider for the default internal system user, used for internal process communication. If no password is specified, the default internal system user will not be created. If the default internal system user already exists, setting this property will not affect its password.
         Required: No
         Default: null

druid.auth.authenticator.MyBasicLDAPAuthenticator.enableCacheNotifications

If true, the Coordinator will notify Druid processes whenever a configuration change to this Authenticator occurs, allowing them to immediately update their state without waiting for polling.
         Required: No
         Default: true

druid.auth.authenticator.MyBasicLDAPAuthenticator.cacheNotificationTimeout

The timeout in milliseconds for the cache notifications.
         Required: No
         Default: 5000

druid.auth.authenticator.MyBasicLDAPAuthenticator.credentialIterations

Number of iterations to use for password hashing.
         Required: No
         Default: 10000

druid.auth.authenticator.MyBasicLDAPAuthenticator.credentialsValidator.type

The type of credentials store (ldap) to validate requests credentials.
         Required: No
         Default: metadata

druid.auth.authenticator.MyBasicLDAPAuthenticator.credentialsValidator.url

URL of the LDAP server.
         Required: Yes
         Default: null

druid.auth.authenticator.MyBasicLDAPAuthenticator.credentialsValidator.bindUser

LDAP bind user username.
         Required: Yes
         Default: null

druid.auth.authenticator.MyBasicLDAPAuthenticator.credentialsValidator.bindPassword

Password Provider LDAP bind user password.
         Required: Yes
         Default: null

druid.auth.authenticator.MyBasicLDAPAuthenticator.credentialsValidator.baseDn

The point from where the LDAP server will search for users.
         Required: Yes
         Default: null

druid.auth.authenticator.MyBasicLDAPAuthenticator.credentialsValidator.userSearch

The filter/expression to use for the search. For example, (&(sAMAccountName=%s)(objectClass=user))
         Required: Yes
         Default: null

druid.auth.authenticator.MyBasicLDAPAuthenticator.credentialsValidator.userAttribute

The attribute id identifying the attribute that will be returned as part of the search. For example, sAMAccountName.
         Required: Yes
         Default: null

druid.auth.authenticator.MyBasicLDAPAuthenticator.credentialsValidator.credentialVerifyDuration

The duration in seconds for how long valid credentials are verifiable within the cache when not requested.
         Required: No
         Default: 600

druid.auth.authenticator.MyBasicLDAPAuthenticator.credentialsValidator.credentialMaxDuration

The max duration in seconds for valid credentials that can reside in cache regardless of how often they are requested.
         Required: No
         Default: 3600

druid.auth.authenticator.MyBasicLDAPAuthenticator.credentialsValidator.credentialCacheSize

The valid credentials cache size. The cache uses a LRU policy.
         Required: No
         Default: 100

druid.auth.authenticator.MyBasicLDAPAuthenticator.skipOnFailure

If true and the request credential doesn't exists or isn't fully configured in the credentials store, the request will proceed to next Authenticator in the chain.
         Required: No
         Default: false

druid.auth.authenticator.MyBasicLDAPAuthenticator.authorizerName

Authorizer that requests should be directed to.
         Required: Yes
         Default: N/A

Escalator​

The Escalator determines the authentication scheme to use for internal Druid cluster communications, for example, when a Broker service communicates with a Historical service during query processing.

Example configuration:

# Escalator
druid.escalator.type=basic
druid.escalator.internalClientUsername=druid_system
druid.escalator.internalClientPassword=password2
druid.escalator.authorizerName=MyBasicMetadataAuthorizer

Properties​

druid.escalator.internalClientUsername

The escalator will use this username for requests made as the internal system user.
         Required: Yes
         Default: N/A

druid.escalator.internalClientPassword

The escalator will use this Password Provider for requests made as the internal system user.
         Required: Yes
         Default: N/A

druid.escalator.authorizerName

Authorizer that requests should be directed to.
         Required: Yes
         Default: N/A

Authorizer​

To use the Basic authorizer, add an authorizer with type basic to the authorizers list.

Use the following syntax to configure a named authorizer:

druid.auth.authorizer.<authorizerName>.<authorizerProperty>

Example configuration:

# Authorizer
druid.auth.authorizers=["MyBasicMetadataAuthorizer"]
druid.auth.authorizer.MyBasicMetadataAuthorizer.type=basic

The examples in the rest of this article use MyBasicMetadataAuthorizer or MyBasicLDAPAuthorizer as the authorizer name.

Properties for Druid metadata store user authorization​

druid.auth.authorizer.MyBasicMetadataAuthorizer.enableCacheNotifications

If true, the Coordinator will notify Druid processes whenever a configuration change to this Authorizer occurs, allowing them to immediately update their state without waiting for polling.
         Required: No
         Default: true

druid.auth.authorizer.MyBasicMetadataAuthorizer.cacheNotificationTimeout

The timeout in milliseconds for the cache notifications.
         Required: No
         Default: 5000

druid.auth.authorizer.MyBasicMetadataAuthorizer.initialAdminUser

The initial admin user with role defined in initialAdminRole property if specified, otherwise the default admin role will be assigned.
         Required: No
         Default: admin

druid.auth.authorizer.MyBasicMetadataAuthorizer.initialAdminRole

The initial admin role to create if it doesn't already exists.
         Required: No
         Default: admin

druid.auth.authorizer.MyBasicMetadataAuthorizer.roleProvider.type

The type of role provider to authorize requests credentials.
         Required: No
         Default: metadata

Properties for LDAP user authorization​

druid.auth.authorizer.MyBasicLDAPAuthorizer.enableCacheNotifications

If true, the Coordinator will notify Druid processes whenever a configuration change to this Authorizer occurs, allowing them to immediately update their state without waiting for polling.
         Required: No
         Default: true

druid.auth.authorizer.MyBasicLDAPAuthorizer.cacheNotificationTimeout

The timeout in milliseconds for the cache notifications.
         Required: No
         Default: 5000

druid.auth.authorizer.MyBasicLDAPAuthorizer.initialAdminUser

The initial admin user with role defined in initialAdminRole property if specified, otherwise the default admin role will be assigned.
         Required: No
         Default: admin

druid.auth.authorizer.MyBasicLDAPAuthorizer.initialAdminRole

The initial admin role to create if it doesn't already exists.
         Required: No
         Default: admin

druid.auth.authorizer.MyBasicLDAPAuthorizer.initialAdminGroupMapping

The initial admin group mapping with role defined in initialAdminRole property if specified, otherwise the default admin role will be assigned. The name of this initial admin group mapping will be set to adminGroupMapping
         Required: No
         Default: null

druid.auth.authorizer.MyBasicLDAPAuthorizer.roleProvider.type

The type of role provider (ldap) to authorize requests credentials.
         Required: No
         Default: metadata

druid.auth.authorizer.MyBasicLDAPAuthorizer.roleProvider.groupFilters

Array of LDAP group filters used to filter out the allowed set of groups returned from LDAP search. Filters can be begin with , or end with , to provide configurational flexibility to limit or filter allowed set of groups available to LDAP Authorizer.
         Required: No
         Default: null

Properties for LDAPS​

Use the following properties to configure Druid authentication with LDAP over TLS (LDAPS). See Configure LDAP authentication for more information.

druid.auth.basic.ssl.protocol

SSL protocol to use. The TLS version is 1.2.
         Required: Yes
         Default: tls

druid.auth.basic.ssl.trustStorePath

Path to the trust store file.
         Required: Yes
         Default: N/A

druid.auth.basic.ssl.trustStorePassword

Password to access the trust store file.
         Required: Yes
         Default: N/A

druid.auth.basic.ssl.trustStoreType

Format of the trust store file. For Java the format is jks.
         Required: No
         Default: jks

druid.auth.basic.ssl.trustStoreAlgorithm

Algorithm used by the trust manager to validate certificate chains.
         Required: No
         Default: N/A

druid.auth.basic.ssl.trustStorePassword

Password details that enable access to the truststore.
         Required: No
         Default: N/A

Example LDAPS configuration:

druid.auth.basic.ssl.protocol=tls
druid.auth.basic.ssl.trustStorePath=/usr/local/druid-path/certs/truststore.jks
druid.auth.basic.ssl.trustStorePassword=xxxxx
druid.auth.basic.ssl.trustStoreType=jks
druid.auth.basic.ssl.trustStoreAlgorithm=PKIX

You can configure druid.auth.basic.ssl.trustStorePassword to be a plain text password or you can set the password as an environment variable. See Password providers for more information.

Usage​

Coordinator Security API​

To use these APIs, a user needs read/write permissions for the CONFIG resource type with name "security".

Authentication API​

Root path: /druid-ext/basic-security/authentication

Each API endpoint includes {authenticatorName}, specifying which Authenticator instance is being configured.

User/Credential Management​

GET(/druid-ext/basic-security/authentication/db/{authenticatorName}/users)
Return a list of all user names.

GET(/druid-ext/basic-security/authentication/db/{authenticatorName}/users/{userName})
Return the name and credentials information of the user with name {userName}

POST(/druid-ext/basic-security/authentication/db/{authenticatorName}/users/{userName})
Create a new user with name {userName}

DELETE(/druid-ext/basic-security/authentication/db/{authenticatorName}/users/{userName})
Delete the user with name {userName}

POST(/druid-ext/basic-security/authentication/db/{authenticatorName}/users/{userName}/credentials)
Assign a password used for HTTP basic authentication for {userName} Content: JSON password request object

Example request body:

{
  "password": "helloworld"
}
Cache Load Status​

GET(/druid-ext/basic-security/authentication/loadStatus)
Return the current load status of the local caches of the authentication Druid metadata store.

Authorization API​

Root path: /druid-ext/basic-security/authorization

Each API endpoint includes {authorizerName}, specifying which Authorizer instance is being configured.

User Creation/Deletion​

GET(/druid-ext/basic-security/authorization/db/{authorizerName}/users)
Return a list of all user names.

GET(/druid-ext/basic-security/authorization/db/{authorizerName}/users/{userName})
Return the name and role information of the user with name {userName}

Example output:

{
  "name": "druid2",
  "roles": [
    "druidRole"
  ]
}

This API supports the following flags:

  • ?full: The response will also include the full information for each role currently assigned to the user.

Example output:

{
  "name": "druid2",
  "roles": [
    {
      "name": "druidRole",
      "permissions": [
        {
          "resourceAction": {
            "resource": {
              "name": "A",
              "type": "DATASOURCE"
            },
            "action": "READ"
          },
          "resourceNamePattern": "A"
        },
        {
          "resourceAction": {
            "resource": {
              "name": "C",
              "type": "CONFIG"
            },
            "action": "WRITE"
          },
          "resourceNamePattern": "C"
        }
      ]
    }
  ]
}

The output format of this API when ?full is specified is deprecated and in later versions will be switched to the output format used when both ?full and ?simplifyPermissions flag is set.

The resourceNamePattern is a compiled version of the resource name regex. It is redundant and complicates the use of this API for clients such as frontends that edit the authorization configuration, as the permission format in this output does not match the format used for adding permissions to a role.

  • ?full?simplifyPermissions: When both ?full and ?simplifyPermissions are set, the permissions in the output will contain only a list of resourceAction objects, without the extraneous resourceNamePattern field.
{
  "name": "druid2",
  "roles": [
    {
      "name": "druidRole",
      "users": null,
      "permissions": [
        {
          "resource": {
            "name": "A",
            "type": "DATASOURCE"
          },
          "action": "READ"
        },
        {
          "resource": {
            "name": "C",
            "type": "CONFIG"
          },
          "action": "WRITE"
        }
      ]
    }
  ]
}

POST(/druid-ext/basic-security/authorization/db/{authorizerName}/users/{userName})
Create a new user with name {userName}

DELETE(/druid-ext/basic-security/authorization/db/{authorizerName}/users/{userName})
Delete the user with name {userName}

Group mapping Creation/Deletion​

GET(/druid-ext/basic-security/authorization/db/{authorizerName}/groupMappings)
Return a list of all group mappings.

GET(/druid-ext/basic-security/authorization/db/{authorizerName}/groupMappings/{groupMappingName})
Return the group mapping and role information of the group mapping with name {groupMappingName}

POST(/druid-ext/basic-security/authorization/db/{authorizerName}/groupMappings/{groupMappingName})
Create a new group mapping with name {groupMappingName} Content: JSON group mapping object Example request body:

{
    "name": "user",
    "groupPattern": "CN=aaa,OU=aaa,OU=Groupings,DC=corp,DC=company,DC=com",
    "roles": [
        "user"
    ]
}

DELETE(/druid-ext/basic-security/authorization/db/{authorizerName}/groupMappings/{groupMappingName})
Delete the group mapping with name {groupMappingName}

Role Creation/Deletion​

GET(/druid-ext/basic-security/authorization/db/{authorizerName}/roles)
Return a list of all role names.

GET(/druid-ext/basic-security/authorization/db/{authorizerName}/roles/{roleName})
Return name and permissions for the role named {roleName}.

Example output:

{
  "name": "druidRole2",
  "permissions": [
    {
      "resourceAction": {
        "resource": {
          "name": "E",
          "type": "DATASOURCE"
        },
        "action": "WRITE"
      },
      "resourceNamePattern": "E"
    }
  ]
}

The default output format of this API is deprecated and in later versions will be switched to the output format used when the ?simplifyPermissions flag is set. The resourceNamePattern is a compiled version of the resource name regex. It is redundant and complicates the use of this API for clients such as frontends that edit the authorization configuration, as the permission format in this output does not match the format used for adding permissions to a role.

This API supports the following flags:

  • ?full: The output will contain an extra users list, containing the users that currently have this role.
{"users":["druid"]}
  • ?simplifyPermissions: The permissions in the output will contain only a list of resourceAction objects, without the extraneous resourceNamePattern field. The users field will be null when ?full is not specified.

Example output:

{
  "name": "druidRole2",
  "users": null,
  "permissions": [
    {
      "resource": {
        "name": "E",
        "type": "DATASOURCE"
      },
      "action": "WRITE"
    }
  ]
}

POST(/druid-ext/basic-security/authorization/db/{authorizerName}/roles/{roleName})
Create a new role with name {roleName}. Content: username string

DELETE(/druid-ext/basic-security/authorization/db/{authorizerName}/roles/{roleName})
Delete the role with name {roleName}.

Role Assignment​

POST(/druid-ext/basic-security/authorization/db/{authorizerName}/users/{userName}/roles/{roleName})
Assign role {roleName} to user {userName}.

DELETE(/druid-ext/basic-security/authorization/db/{authorizerName}/users/{userName}/roles/{roleName})
Unassign role {roleName} from user {userName}

POST(/druid-ext/basic-security/authorization/db/{authorizerName}/groupMappings/{groupMappingName}/roles/{roleName})
Assign role {roleName} to group mapping {groupMappingName}.

DELETE(/druid-ext/basic-security/authorization/db/{authorizerName}/groupMappings/{groupMappingName}/roles/{roleName})
Unassign role {roleName} from group mapping {groupMappingName}

Permissions​

POST(/druid-ext/basic-security/authorization/db/{authorizerName}/roles/{roleName}/permissions)
Set the permissions of {roleName}. This replaces the previous set of permissions on the role.

Content: List of JSON Resource-Action objects, e.g.:

[
{
  "resource": {
    "name": "wiki.*",
    "type": "DATASOURCE"
  },
  "action": "READ"
},
{
  "resource": {
    "name": "wikiticker",
    "type": "DATASOURCE"
  },
  "action": "WRITE"
}
]

The "name" field for resources in the permission definitions are regexes used to match resource names during authorization checks.

Please see Defining permissions for more details.

Cache Load Status​

GET(/druid-ext/basic-security/authorization/loadStatus)
Return the current load status of the local caches of the authorization Druid metadata store.